Thermador Stand Up Freezer Not Freezing: Troubleshooting and Fixes for Freezer Problems

Thermador Stand Up Freezer Not Freezing

Thermador Stand-Up Freezer Not Freezing? Here’s What Might Be Wrong and How to Fix It

A stand-up freezer that suddenly stops freezing can cause many problems, especially if you rely on it for long-term food storage. Food spoils quickly without the freezing temperatures, leading to waste and unexpected grocery bills. If you notice that your Thermador freezer isn’t as cold as it should be, or used to be, this guide will walk you through some common reasons and practical solutions.

Knowing how your freezer works and what each part does can also help you understand why certain issues might arise. Let’s examine how your freezer keeps things cold, explore the main causes of freezing problems, and review some steps to fix each issue.

Basic Function of a Stand-Up Freezer

Your freezer relies on several parts working together continuously to keep everything cold. Here’s a quick breakdown of how each main component plays a role in cooling:

  1. Compressor: The compressor is like your freezer’s engine. It compresses a gas called refrigerant, which then circulates through the system. When compressed, this gas heats up, then cools back down as it moves through the coils. The compressor’s job is to keep the refrigerant moving so the freezer can stay cold.
  2. Condenser Coils: Located at the back or bottom of the freezer, condenser coils let heat out of the system. When the hot refrigerant gas passes through them, it releases heat, allowing the gas to cool and turn back into liquid. If these coils get dirty or blocked, they can’t release heat effectively, leading to cooling problems.
  3. Evaporator Coils: These are located inside the freezer. When the cooled refrigerant passes through the evaporator coils, it absorbs heat from inside, lowering the temperature. This keeps the freezer’s interior cold.
  4. Evaporator Fan Motor: The fan motor pushes cold air from the evaporator coils around the freezer. Cold air wouldn’t circulate well without this fan, and the freezer wouldn’t cool evenly.
  5. Thermostat: The thermostat controls the freezer’s temperature. When the temperature rises above the set level, the thermostat signals the compressor to start cooling until the freezer is back at the right temperature.

    For the freezer to maintain a consistent temperature, these parts need to be in good working condition. If one part isn’t working right, the freezer’s cooling cycle is disrupted, and food may not be able to be frozen. Regular maintenance, like cleaning the coils, can help keep everything running smoothly.


Main Reasons Your Freezer Isn’t Freezing

Let’s go over the most common issues that prevent a Thermador freezer from freezing properly and what you can do to address each one.


Incorrect Temperature Setting

  • What’s the Problem? Sometimes, the temperature setting can be adjusted accidentally, or the controls may malfunction over time. The freezer won’t freeze things if it is set to the wrong temperature.
  • Solution: The first thing to do is check the temperature control inside your freezer. It’s usually located on the front panel. It should be set around 0°F (-18°C) for proper freezing. If you notice that the temperature is set too high, adjust it and wait a few hours to see if it gets colder. If changing the setting doesn’t help, the control panel itself could be faulty and may need to be checked by a professional.


Dirty Condenser Coils

  • What’s the Problem? Over time, dust and dirt can build up on the condenser coils, making it hard for them to release heat. If the coils can’t efficiently remove heat, the freezer can struggle to stay cold.
  • Solution: Unplug the freezer for safety. Locate the condenser coils (typically at the back or bottom) and clean them using a vacuum with a brush attachment or a coil brush. Gently remove dust and debris from the coils, ensuring they are not damaged. Clean coils can make a noticeable difference in cooling performance. Try to clean the coils at least twice a year for proper maintenance.


Faulty Evaporator Fan Motor

  • What’s the Problem? The evaporator fan motor is essential for circulating cold air throughout the freezer. If this fan isn’t working, cold air can’t flow around correctly, leading to uneven temperatures in different areas of the freezer.
  • Solution: Listen for any strange noises when the freezer is running. A loud humming or rattling sound can mean the fan motor is failing. If the fan isn’t working, you may need to replace it. If you’re comfortable with basic repairs, you might be able to do this yourself, but if not, call a professional technician.


Broken Start Relay

  • What’s the Problem? The start relay helps the compressor kick on. If it’s broken, the compressor may not turn on, making it seem like a compressor issue, and in turn, the freezer won’t cool.
  • Solution: The start relay is usually located on the side of the compressor. You can test it with a multimeter to see if it’s working. If it’s faulty, you’ll need to replace it. If you don’t have experience with electrical components, it’s best to have a technician handle this repair.


Compressor Issues

  • What’s the Problem? The compressor is what makes the entire cooling process work. If it’s not running correctly, the freezer won’t freeze.
  • Solution: Listen for unusual sounds like loud humming, clicking, or complete silence when the compressor should be running. If it’s struggling, professional repair might be needed. Compressors are complex and expensive to replace, so getting an expert opinion is recommended.


Worn-Out Door Seal

  • What’s the Problem? The door seal, also called the gasket, prevents warm air from entering the freezer. If the seal is worn or cracked, warm air can leak in, making it difficult for the freezer to keep a low temperature.
  • Solution: Run your hand along the door seal to check for any cold air escaping. If you feel air leaking or see cracks, replace the gasket. This is an easy fix you can often do yourself by ordering a replacement from the manufacturer.


Clogged Defrost Drain

  • What’s the Problem? When the defrost drain gets clogged with ice or debris, water builds up and can freeze in unwanted areas. This can impact the freezer’s ability to maintain cold temperatures.
  • Solution: Locate the defrost drain near the bottom at the back of the Freezer. Pour warm water over the drain to melt any ice and clear the blockage; this should restore normal function and prevent ice buildup. Some Thermador freezers have a built-in defrost function. Cleaning the drain regularly can prevent this problem from happening again.


Faulty Temperature Sensor or Thermistor

  • What’s the Problem? The temperature sensor, also called a thermistor, measures the temperature inside the freezer and signals the control board to adjust cooling as needed. If the sensor is faulty, the freezer may not cool properly.
  • Solution: Use a multimeter to test the thermistor for continuity. If it’s broken, replacing it can usually solve the issue. Working with sensors requires technical knowledge, so if you’re unfamiliar with these parts, consider contacting a technician.


Troubleshooting Checklist

Here’s a simple checklist to help you troubleshoot your freezer:

  1. Check Power Supply: Ensure the Freezer is plugged in and receiving power. Sometimes, the issue could be with the power outlet rather than the fridge itself.
  2. Temperature Settings: Adjust the thermostat to the recommended freezing temperature of 0°F (-18°C).
  3. Clean Condenser Coils: To remove potential blockages, dust and vacuum around the coils twice a year.
  4. Listen for Noises: Unusual sounds could often mean an evaporator fan or compressor issue.
  5. Inspect Door Seal: Check if the door seals are in good condition to keep cold air inside; they are often the first component of the fridge that wears down.


If you’ve tried these steps and the freezer still won’t freeze, it might be time to get help from a professional technician.

When to Call a Professional

Sometimes, do-it-yourself fixes won’t cut it, and calling a professional is the best choice, primarily if you cannot diagnose a potential issue. Here are some situations when expert help is likely needed:

  • Compressor Problems: Compressor repairs can be complex and should be handled by a technician.
  • Recurring Issues: If you’ve tried several fixes but the problem keeps coming back, there could be an underlying issue that requires a detailed diagnosis.
  • Electrical Components: Parts like the start relay, thermistor, control boards, and control modules are electrical and can be risky to replace without experience.
  • Unusual Noises: Strange sounds such as loud buzzing, clicking, or clunking, are signs of serious problems that a professional should assess.

Calling a professional might seem costly, but it can save time and prevent further damage. A skilled technician can pinpoint the problem and help you avoid expensive repairs in the future. Regular maintenance is key to keeping your freezer running well.

Need a technician? See our Refrigerator Repair service page for same-day bookings across the Lower Mainland, or call (778) 941-7758.